CLI Guide

A
N/A
[Server Module Power Allocation Table]
<Slot#> <Server Name> <Power State> <Allocation>
<Priority> <Blade Type>
1 SLOT-1 ON 605
W 1 PowerEdge MX840c
2 Extension (1) N/A N/
A N/A N/A
3 SLOT-3 ON 792
W 1 PowerEdge MX840c
4 Extension (3) N/A N/
A N/A N/A
5 SLOT-5 ON 227
W 1 PowerEdge MX740c
6 SLOT-6 ON 228
W 1 PowerEdge MX740c
7 SLOT-7 ON 240
W 1 PowerEdge MX740c
8 SLOT-8 ON 622
W 1 PowerEdge MX740c
getpminfo
Description
Gets power management status information.
Synopsis
racadm getpminfo
Input
racadm getpminfo
Example
[Real-Time Power Statistics]
System Input Power = 616 W (2101 BTU/h)
Peak System Power = 628 W (2142 BTU/h)
Peak System Power Start Time = Not Applicable
Peak System Power Timestamp = 11:37:36 08/08/2018
Minimum System Power = 606 W (2067 BTU/h)
Minimum System Power Start Time = Not Applicable
Minimum System Power Timestamp = 10:16:08 08/06/2018
System Idle Power = Not Applicable
System Potential Power = Not Applicable
System Input Current Reading = Not Applicable
[Real-Time Energy Statistics]
System Energy Consumption = 204 kWh
System Energy Consumption Start Time = Not Applicable
System Energy Consumption Timestamp = 05:47:05 08/20/2018
[System Power Status]
Chassis Power State = ON
Overall Power Health = Not OK
Redundancy = No
[System Power Policy Configuration]
System Input Power Cap = Disabled
Redundancy Policy = None
Dynamic PSU Engagement Enabled = Not Applicable
[Power Budgeting]
System Input Max Power Capacity = 11571 W
RACADM sub command details
19