Users Guide

Upgrade time for a switch may take between 30 to 120 minutes. Sometimes the upgrade time can be as long as 4.5 hours.
To check the upgrade status, you can see OME-M job page or you can log in to the switch and execute show smart-fabric
upgrade-status.
Upgrading networking OS10 using DUP
To upgrade OS10 using DUP, follow these steps:
1. Download the latest DUP file for the switch from https://www.dell.com/support.
2. On the OME-Modular web interface, go to Devices > I/O Modules.
3. Select the IOM module on which you must carry out the OS10 upgrade.
4. Click Update Firmware.
5. Select the Individual package option, then click Browse and go to the location where the OS10 DUP was downloaded earlier.
Wait for the compliance report, once done, the supported components are displayed.
6. Select the required components and click Update, to start the update.
For upgrading from different versions earlier than 10.5.0.7, see Upgrading networking switch using different DUP versions
section.
7. Go to Monitoring > Jobs page, to view the job status.
Upgrading Firmware and ONIE using DUP
NOTE: ONIE upgrade using DUP method is supported only if all the IOMs in the group are in 10.5.2.4 and later.
To upgrade ONIE using DUP, follow these steps:
1. Download the latest ONIE DUP file for the switch from https://www.dell.com/support.
2. On the OME-Modular web interface, go to Devices > I/O Modules.
3. Select the IOM module on which you must carry out the ONIE upgrade.
4. Click Update Firmware.
5. Select the Individual package option, then click Browse and go to the location where the ONIE DUP was downloaded earlier.
Wait for the compliance report, once done, the supported components are displayed.
6. Select the required components and click Update, to start the update.
7. Go to Monitoring > Jobs page, to view the job status.
OS10 firmware update matrix
Table 4. OS10 firmware update matrix
To
OS10
version
10.4.0
E(R3S
P2)
10.4.0E(
R4SP2)
10.5.0.1 10.5.0.3
P1
10.5.0.5 10.5.0.9 10.5.1.9 10.5.2.4 10.5.2.6
From
10.4.0E(R
3SP2)
— — — — — Yes* — — —
10.4.0E(R
4SP2)
— — — — — Yes* — — —
10.5.0.1 — — — — — Yes — — —
10.5.0.3P1 — — — — — Yes — — —
10.5.0.5 — — — — — Yes — — —
10.5.0.7 — — — — — — Yes — Yes
10.5.0.9 — — — — — — Yes — Yes
22 Updating firmware for PowerEdge MX solution