Users Guide
Table Of Contents
- Dell EMC OpenManage Enterprise-Modular Edition for PowerEdge MX7000 Chassis User's Guide
- Contents
- Overview
- Updating firmware for PowerEdge MX solution
- MX7000 Solution Baselines
- Upgrading ethernet switch using DUP
- OME-Modular licenses
- Logging in to OME-Modular
- Logging in to OME–Modular as local, Active Directory, or LDAP user
- Logging in to OME-Modular using OpenID Connect
- OME-Modular home page
- Viewing device health
- Setting up chassis
- Initial configuration
- Configuring chassis settings
- Managing chassis
- Chassis groups
- Controlling chassis power
- Backing up chassis
- Restoring chassis
- Exporting chassis profiles
- Managing chassis failover
- Troubleshooting in chassis
- Blinking LEDs
- Interfaces to access OME-Modular
- Viewing chassis hardware
- Viewing chassis alerts
- Viewing chassis hardware logs
- Configuring OME–Modular
- Viewing current configuration
- Configuring users and user settings
- Configuring login security settings
- Configuring alerts
- Managing compute sleds
- Managing Profiles
- Managing storage
- Managing templates
- Managing identity pools
- Ethernet IO Modules
- MX Scalable Fabric architecture
- SmartFabric Services
- Managing networks
- Managing Fibre Channel IOMs
- Managing firmware
- Monitoring alerts and logs
- Monitoring audit logs
- Use case scenarios
- Troubleshooting
- Storage
- Firmware update is failing
- Storage assignment is failing
- SAS IOM status is downgraded
- SAS IOM health is downgraded
- Drives on compute sled are not visible
- Storage configuration cannot be applied to SAS IOMs
- Drives in OpenManage are not visible
- iDRAC and OpenManage drive information do not match
- The assignment mode of storage sled is unknown
- Unable to access OME-Modular using Chassis Direct
- Troubleshooting lead chassis failure
- Storage
- Recommended slot configurations for IOMs
- Creating validated firmware solution baseline using Dell Repository Manager
- Upgrading networking switch using different OS10 DUP versions
- Upgrading networking switch using CLI
Upgrading networking switch using different
OS10 DUP versions
The following sections provide you the information to upgrade OS10 using different DUP versions.
NOTE: When you upgrade VLT peers from 10.4.0E (R3S or R4S) to 10.5.0.1 or later during the maintenance window, it may
impact traffic during the upgrade.
NOTE: The DUP update procedure is recommended to upgrade OS10 on the MX9116n and MX5108n.
Topics:
• Upgrading networking switch to 10.5.0.7 or 10.5.0.9 using DUP
• Prerequisites for upgrading from versions earlier than 10.5.0.5
• Prerequisites for upgrading from 10.5.0.5
Upgrading networking switch to 10.5.0.7 or 10.5.0.9
using DUP
To upgrade network switch using DUP, follow these steps:
1. Download the latest DUP file for the switch from https://www.dell.com/support.
2. On the OME-Modular web interface, go to Devices > I/O Modules.
3. Select the IOM module on which you must carry out the OS10 upgrade.
4. Click Update Firmware.
5. Select the Individual package option, then click Browse and go to the location where the DUP was downloaded earlier. Wait
for the compliance report, once done, the supported components are displayed.
6. Select the required components and click Update, to start the update.
7. Go to Monitoring > Jobs page, to view the job status.
Prerequisites for upgrading from versions earlier than
10.5.0.5
● When updating, ensure to update the IOMs in groups no larger than four per upgrade job.
● If there are two switches in a full-switch mode VLT, each switch must be part of different upgrade batch for redundancy.
● If there are two switches in a SmartFabric, select only one switch. The other switch is automatically updated and is counted
as "2" in that upgrade group.
● Upgrade main or its peer fabric IOM in last group.
NOTE:
Run the X.509v3 certificate upgrade script before upgrading any OS versions. For more details see, OS10 firmware
update matrix.
To identify the main IOM:
1. Log in to any IOM switch
2. Go to linux prompt using the commands:
a. system bash
b. sudo -i
C
142 Upgrading networking switch using different OS10 DUP versions