Users Guide
Table Of Contents
- PowerEdge MX7000シャーシ用Dell EMC OpenManage Enterprise-Modular Editionバージョン1.30.00 ユーザーズ ガイド
- 概要
- PowerEdge MXソリューションのファームウェアのアップデート
- OME-Modularのライセンス
- OME-Modular へのログイン
- ローカルユーザー、Active Directory ユーザー、または LDAP ユーザーとしての OME–Modular へのログイン
- シングル サインオンを使用したOME-Modularへのログイン
- OpenID Connectを使用したOME-Modularへのログイン
- OME-Modular ホームページ
- デバイス正常性の表示
- シャーシのセットアップ
- 初期設定
- シャーシの設定
- シャーシの管理
- シャーシグループ
- シャーシの電源制御
- シャーシのバックアップ
- シャーシの復元
- シャーシプロファイルのエクスポート
- シャーシフェールオーバーの管理
- シャーシのトラブルシューティング
- LED の点滅
- OME-Modular にアクセスするためのインタフェース
- シャーシハードウェアの表示
- シャーシアラートの表示
- シャーシのハードウェアログの表示
- OME-Modular の設定
- コンピュートスレッドの管理
- プロファイルの管理
- ストレージの管理
- テンプレートの管理
- ID プールの管理
- イーサネット IO モジュール
- MXの拡張性の高いファブリック アーキテクチャ
- SmartFabric サービス
- ネットワークの管理
- ファイバチャネル IOM の管理
- ファームウェアの管理
- アラートとログの監視
- 監査ログの監視
- 使用事例シナリオ
- トラブルシューティング
- IOM の推奨スロット構成
- 異なるOS10 DUPバージョンを使用したネットワーキング スイッチのアップグレード
- Upgrading networking switch using CLI
Identifier GUID-98255470-12A9-4CCF-B99E-52F704175308
Version 3
Status Released
Prerequisites for upgrading from versions earlier than
10.5.0.5
● When updating, ensure to update the IOMs in groups no larger than four per upgrade job.
● If there are two switches in a full-switch mode VLT, each switch must be part of different upgrade batch for redundancy.
● If there are two switches in a SmartFabric, select only one switch. The other switch is automatically updated and is counted as "2" in
that upgrade group.
● Upgrade main or its peer fabric IOM in last group.
To identify the main IOM:
1. Log in to any IOM switch
2. Go to linux prompt using the commands:
a. system bash
b. sudo -i
3. Go to the SmartFabric Services CLI prompt using the command:
python /opt/dell/os10/bin/rest-service/tool/dnv_cli.py
4. Get the main IOM service tag using below command:
show cluster
異なる OS10 DUP バージョンを使用したネットワーキング スイッチのアップグレード 157