Users Guide

● Inter-chassis link online insertion removal
● MM online insertion removal
● IOM main upgrade
● IOM main reset
● Fab-D congestions—Reasons for the congestion include downloading huge files that cause the FAB-D to drop other traffic
The details of the assigned MAC addresses for the respective NIC partitions are displayed on the Jobs Details page, that are based on
the configuration results from iDRAC.
To view the details of a job:
1. On the Jobs page, select the job of which you want to view the details.
A summary of the job is displayed on the right side of the Jobs page.
2. Click View Details.
The Job Details page is displayed.
The details including name, description, execution details, and the details of the system on which the job was run, are displayed.
On Job Details page, you can perform the following tasks:
● Restart the job
● Export details of the job in a .csv format to a local drive on your system or a network share
NOTE: The Restart option for the MCM onboarding task for adding a member chassis is disabled irrespective of the job status.
Sometimes after a firmware update, racreset or management module failover, a message stating that the alerts could not be
retrieved is displayed. The message that is displayed does not impact the functionality of OME–Modular.
Identifier GUID-41D797DE-607C-42C2-AC43-5D2B58CF5E3D
Version 1
Status Translation Validated
导出作业执行详细信息
您可以将作业执行详细信息以 .txt 格式导出到系统上的本地驱动器。
要导出作业详细信息，请执行以下操作：
在作业详细信息页面中，单击执行详细信息选项卡下的导出。
将执行详细信息下载到系统上的本地驱动器（采用 .txt 格式）。
作业执行详细信息是 - 作业的开始和结束日期、状态、已用时间、作业运行所在的目标系统以及作业消息。
注: 始终以 .txt 格式下载报告。报告中的时间格式显示 GMT 24 小时格式，而用户界面显示为 12 小时格式。
Identifier GUID-308A2FBD-5906-4311-879B-3A208EFEA720
Version 3
Status Translation Validated
运行作业
如果作业运行时间超过 24 小时，请在分析作业详细信息后停止该作业。如果需要，重新运行该作业。
您可以使用作业页面来立即运行作业。
要运行的作业：
在作业页面中，选择您要运行的作业，然后单击立即运行。
将会显示一条消息，以确认任务已重新开始。
Identifier
GUID-51011F0D-7DCD-42CE-B312-5EA2A1EE5D71
Version 1
Status Translation Validated
停止作业
您可以停止正在进行的作业。
要停止作业：
监测审核日志 129