CLI Guide

Table 208. ProcTurboMode or turbomode (continued)
whenever the other core has gone into an idle state. When enabled, the processor
can operate in Turbo Boost Mode.
Example:
A:>syscfg --turbomode=enable
--turbomode=enable
SysProfile or profile
Table 209. SysProfile or profile
Valid Arguments
● On systems prior to Dell’s YX2X systems: maxperformance, osctl, apc, custom
● On Dell’s YX2X and later systems: PerfPerWatt OptimizedOs, PerfPerWatt
OptimizedDapc, PerfOptimized, Custom, DenseCfg Optimized
Description
Configures the system power profile. When set to a mode other than custom, BIOS
will set each option accordingly. When set to custom, you can change setting of
each option.
NOTE: On systems prior to Dell’s 12th generation PowerEdge systems,
profile is a sub-option of power.
Example:
A:>syscfg --profile=maxperformance
profile=maxperformance
EnergyEfficientTurbo
Table 210. EnergyEfficientTurbo
Valid Arguments
● On systems prior to Dell’s YX3X systems: NA
● On Dell’s YX3X and later systems: Enabled, Disabled
Description
Enables or disables the Energy Efficient Turbo (EET). EET is a mode of operation
where the core frequency of a processor is adjusted within the turbo range based on
workload.
Example:
A:>syscfg --EnergyEfficientTurbo=Enabled
EnergyEfficientTurbo=Enabled
Proc n TurboCoreNum
Table 211. Proc
n TurboCoreNum
Valid Arguments
● On systems prior to Dell’sYX3X systems: NA
● On Dell’s YX3X and later systems: All, 1, 2, 4, 6, 8, 10, 12, 14, 16, 18
Description
Sets the number of Turbos Boost-enabled cores for a processor. By default, the
maximum number of cores per processor is enabled.
SYSCFG 97