CLI Guide

MemFrequency or memorypowermode
Table 199. MemFrequency or memorypowermode
Valid Arguments
● On systems prior to Dell’s YX2X systems: min, 978, 800, 1067, 1333, max
● On Dell’s YX2X and later systems: MaxPerf, 2133MHz, 1866MHz, 1600MHz,
1333MHz, 1067MHz, 800MHz, MaxReliability
Description
Sets the speed of system memory.
NOTE: On systems prior to Dell’s 12th generation PowerEdge systems,
memorypowermode is a suboption of Power.
Example:
A:>syscfg --MemFrequency=MaxPerf
MemFrequency=MaxPerf
MemPatrolScrub
Table 200. MemPatrolScrub
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Standard, Extended, Disabled
Description
Sets the Memory Patrol Scrub frequency as Standard Mode, Extended Mode,
or Disabled.
Example:
A:>syscfg --MemPatrolScrub=Standard
MemPatrolScrub=Standard
MemRefreshRate
Table 201. MemRefreshRate
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: 1x, 2x
Description
Sets the Memory Refresh Rate as 1x or 2x
Example:
A:>syscfg --MemRefreshRate=1x
MemRefreshRate=1x
94 SYSCFG