CLI Guide

SataPortJModel
Table 181. SataPortJModel
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortJModel
SecurityFreezeLock
Table 182. SecurityFreezeLock
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Enabled, Disabled
Description
Sends the Security Freeze Lock command to the embedded SATA drives during
power-on self-test (POST). The option is applicable only to ATA and AHCI, and not
to RAID.
Example:
A:>syscfg --SecurityFreezeLock=Enabled
SecurityFreezeLock=Enabled
Serial Communication
You can manage the serial port settings using the options in this group.
ConTermType or conterm
Table 183. ConTermType or conterm
Valid Arguments
● On systems prior to Dell’s YX2X systems: vt100, ansi
● On Dell’s YX2X and later systems: Vt100, Vt220, Ansi
Description
Sets the console terminal type. On some systems, vt100 may also set the terminal
type to vt220. This option is available on all supported systems that support console
redirection. This option can be replicated.
Example:
A:>syscfg --conterm=vt100
conterm=vt100
88 SYSCFG