CLI Guide

SataPortI or sata7
Table 174. SataPortI or sata7
Valid Arguments
● On systems prior to Dell’s YX2X systems: auto, off
● On Dell’s YX2X and later systems: Off, Auto
Description
Turns the SATA port 7 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata7=auto
sata7=auto
SataPortICapacity
Table 175. SataPortICapacity
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the total capacity of a hard disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortICapacity
SataPortIDriveType
Table 176. SataPortIDriveType
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortIDriveType
SataPortIModel
Table 177. SataPortIModel
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the drive model of the selected device.
86 SYSCFG