CLI Guide

Table 170. SataPortH or sata7 (continued)
Example:
A:>syscfg --sata7=auto
sata7=auto
Applicable Systems All PowerEdge systems.
SataPortHCapacity
Table 171. SataPortHCapacity
Valid Arguments
● On systems prior to YX2X: NA
● On YX2X and later systems: read-only
Description
Displays the total capacity of a hard-disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortHCapacity
SataPortHDriveType
Table 172. SataPortHDriveType
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortHDriveType
SataPortHModel
Table 173. SataPortHModel
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortHModel
SYSCFG 85