CLI Guide

Table 98. OneTimeUefiBootSeqDev (continued)
Example:
A:>syscfg --OneTimeUefiBootSeqDev= 2,3,4,5,1,6
The following devices are set in the boot sequence:
Device 2:* usbcdrom.slot.1- USB CD-ROM device
Device 3:* virtualcd.slot.1 – VIRTUAL CDROM
Device 4:* hdd.emb.0 -Hard drive C:
Device 5:* nic.emb.1 - MBA v2.5.12 Slot 0500
Device 1:* virtualfloppy.slot.1 - VIRTUAL FLOPPY
Device 6:* usbfloppy.slot.1 - USB Floppy device
NOTE: The asterisk indicates that the device is enabled in the BIOS.
Processor Settings
You can manage the processor settings using the options in this group.
DataReuse or datareuse
Table 99. DataReuse or datareuse
Valid Arguments
● On systems prior to YX2X : enable, disable
● On YX2X and later systems: Enabled, Disabled
Description
Enables (default value) or disables data reuse in cache. Set to enable for High
Performance Computing (HPC) applications. Set to disable for energy efficiency.
This option can be replicated.
A:>syscfg --datareuse=enable
datareuse=enable
DcuIpPrefetcher
Table 100. DcuIpPrefetcher
Valid Arguments
● On systems prior to YX2X: NA
● On YX2X and later systems: Enabled, Disabled
Description
Enables (default value) or disables DCU IP Prefetcher.
64 SYSCFG