CLI Guide

One-Time Boot

You can manage the one time boot settings using the options in this group.

OneTimeBootMode

Table 95. OneTimeBootMode

Valid Arguments

● On systems prior to YX2X: NA

● On YX2X and later systems: Disabled, OneTimeBootSeq, OneTimeHddSeq,

OneTimeUefiBoot Seq, OneTimeCustomBootSeqStr, OneTimeCustomH

ddSeqStr, OneTimeCustomU efiBootSeqStr

Description

Allows to set the one-time boot sequence.

Example:

A:>syscfg --OneTimeBootMode=Disabled

OneTimeBootMode=Disabled

OneTimeBootSeqDev or nextboot

Table 96. OneTimeBootSeqDev or nextboot

Valid Arguments

● On systems prior to YX2X: <valid device name> (from the bootseq option device

list)

● On YX2X and later systems: numerical list separated by commas or list of device

names separated by commas

Description

Sets the specified device as the first device in the boot order for the next boot cycle

only. The device must be a device from the bootseq option device list. Run the

bootseq option to see a list of available device names. For more information, see --

bootmode . This option is not replicated. If Boot Mode is set to UEFI, the system

temporarily switches the Boot Mode to BIOS when attempting a one-time boot to

the device.

Example:

A:>syscfg --OneTimeBootSeqDev= 2,3,4,5,1,6

The following devices are set in the boot sequence:

Device 2:* usbcdrom.slot.1- USB CD-ROM device

Device 3:* virtualcd.slot.1 – VIRTUAL CDROM

Device 4:* hdd.emb.0 -Hard drive C:

Device 5:* nic.emb.1 - MBA v2.5.12 Slot 0500

Device 1:* virtualfloppy.slot.1 - VIRTUAL FLOPPY

Device 6:* usbfloppy.slot.1 - USB Floppy device

SYSCFG