CLI Guide

Table 83. VideoMem (continued)
● On YX2X and later systems: read-only
Description
Displays the total amount of video memory available to the embedded video
controller.
Example:
A:>syscfg --VideoMem
ClusterOnDie
Table 84. ClusterOnDie
Valid Arguments
● On systems prior to YX2X: NA
● On YX2X and later systems: Enabled, Disabled
Description Enables or disables the Cluster On Die option. When enabled, the feature enhances
the performance of the system with two caching agents.
A:>syscfg --ClusterOnDie=Enabled
ClusterOnDie=Enabled
RedundantOsLocation
Table 85. RedundantOsLocation
Valid Arguments
● On systems prior to YX4X: NA
Description
Specifies the backup device for the Redundant OS Control feature. When Redundant
OS Boot is set to Enabled, the BIOS will boot to this device.
NOTE: In order for the devices and slots listed below to show up as optional
backup devices, their settings must be as shown:
SD Card Port -- On
Internal USB Port -- On
Embedded SATA -- anything other than Off
PCIe Slot Disablement -- Enabled
Example:
A:>syscfg --RedundantOsLocation
Miscellaneous Settings
You can manage the miscellaneous settings using the options in this group.
AssetTag or asset
Table 86. AssetTag or asset
Valid Arguments
● On systems prior to YX2X: read-only
58 SYSCFG