CLI Guide

Table 67. HttpDevnProtocol (continued)
Example:
A:>syscfg --HttpDev2Protocol=IPv4
HttpDev2Protocol=IPv4
HttpDevnVlanEnDis
Table 68. HttpDevnVlanEnDis
Valid Arguments
● On systems prior to YX4X: NA
● On YX4X systems: Enabled, Disabled
Description Set the field to Enabled if your DNS or HTTP servers reside on a Virtual LAN
(VLAN). The value of n in HttpDevnVlanEnDis can be from 1 to 4.
Example:
A:>syscfg --HttpDev3VlanEnDis=Enabled
HttpDev3VlanEnDis=Enabled
HttpDevnVlanId
Table 69. HttpDevnVlanId
Valid Arguments
● On systems prior to YX4X: NA
● On YX4X systems: Enabled, Disabled
Description When VLAN is enabled, identifies which of the 4094 possible VLANs contains the
desired DNS or HTTP servers. This value can be 1 – 4094 inclusive. Where n is from
1 to 4.
Example:
A:>syscfg --HttpDev2VlanId=Enabled
Memory Settings
You can manage the memory-related configuration settings using the objects in this group.
CorrEccSmi or memprefailurenotify
Table 70. CorrEccSmi or memprefailurenotify
Valid Arguments
● On systems prior to YX2X: enable, disable
● On YX2X and later systems: Enabled, Disabled
Description
Enables or disables the Correctable ECC SMIs. When enabled, the SMIs report the
Correctable ECC errors.
This option can be replicated.
SYSCFG 53