CLI Guide

IscsiDev1Con n VlanId
Table 58. IscsiDev1Con n VlanId
Valid Arguments
● On systems prior to YX4X: NA
● On YX4X systems: <integer>
Description
Displays the virtual LAN (VLAN) ID of the iSCSI connection. Where the value of n in
IscsiDev1ConnVlanId can be 1 or 2.
Example:
A:>syscfg --IscsiDev1Con1VlanId
IscsiDev1Con1VlanId=XXXX
IscsiDev1Con n Auth
Table 59. IscsiDev1Con n Auth
Valid Arguments
● On systems prior to YX4X: NA
● On YX4X systems: None, Chap
Description
Sets the authentication type of the iSCSI connection. Where the value of n in
IscsiDev1ConnAuth can be 1 or 2.
Example:
A:>syscfg --IscsiDev1Con1Auth=None
IscsiDev1Con1Auth=None
Network Settings
You can manage the system network settings using the options in this group.
PxeDev n EnDis
Table 60. PxeDev
n EnDis
Valid Arguments
● On systems prior to YX2X: NA
● On YX2X and later systems: Enabled, Disabled
Description
Enables or disables the Preboot Execution Environment (PXE) device. When
enabled, a Unified Extensible Firmware Interface (UEFI) boot option is created for
the PXE device.
NOTE: The value of n in PxeDevnEnDis can be 1–4.
Example:
A:>syscfg --PxeDev1EnDis=Enabled
PxeDev1EnDis=Enabled
50 SYSCFG