CLI Guide

Table 47. MmioAbove4Gb (continued)
Example:
A:>syscfg --MmioAbove4Gb=Enabled
MmioAbove4Gb=Enabled
Usb3Setting
Table 48. Usb3Setting
Valid Arguments
● On systems prior to YX3X: NA
● On YX3X and later systems: Auto, Enabled, Disabled
Description
Enables or disables the USB 3.0 port.
● Auto — USB ports operate at USB 2.0 speed.
● Enabled — USB ports operates at USB 3.0 speed.
● Disabled — USB 3.0 host controller is disabled and the speed is set to USB
2.0.
Example:
A:>syscfg --Usb3Setting=Auto
Usb3Setting=Auto
CurrentEmbVideoState
Table 49. CurrentEmbVideoState
Valid Arguments
● On systems prior to YX2X: NA
● On YX2X and later systems: read-only
Description
Displays the current state of the Embedded Video Controller.
Example:
A:>syscfg --CurrentEmbVideoState
CurrentEmbVideoState=xxx
InternalSdCardPrimaryCard
Table 50. InternalSdCardPrimaryCard
Valid Arguments
● On systems prior to YX3X: NA
● On YX3X and later systems: SdCard1, SdCard2
Description
Sets an internal SD card as the primary SD card.
A:>syscfg --InternalSdCardPrimaryCard=SdCard1
InternalSdCardPrimaryCard=SdCard1
SYSCFG 47