CLI Guide

Table 35. IntegratedNetwork1 (continued)
Description Enables or disables Integrated Network 1.
NOTE: If set to DisabledOs, the Integrated NICs may still be available for
shared network access by the embedded management controller. This function
must be configured through the NIC management utilities provided with your
system.
Example:
A:>syscfg --IntegratedNetwork1=Enabled
IntegratedNetwork1=Enabled
IntegratedNetwork2
Table 36. IntegratedNetwork2
Valid Arguments
● On systems prior to YX2X: NA
● On YX2X and later systems: Enabled, DisabledOs
Description Enables or disables Integrated Network 2.
NOTE: If set to DisabledOs, the Integrated NICs may still be available for
shared network access by the embedded management controller. This function
must be configured through the NIC management utilities provided with your
system.
Example:
A:>syscfg --IntegratedNetwork2=Enabled
IntegratedNetwork2=Enabled
IntegratedRaid or integratedraid
Table 37. IntegratedRaid or integratedraid
Valid Arguments
● On systems prior to YX2X: enable, disable
● On YX2X and later systems: Enabled, Disabled
Description
Enables or disables the integrated RAID controller. This option can be replicated.
Example:
A:>syscfg --integratedraid=disable
integratedraid=disable
IntegratedSas or integratedsas
Table 38. IntegratedSas or integratedsas
Valid Arguments
● On systems prior to YX2X: enable, disable
SYSCFG 43