CLI Guide

Table 29. EmbNic2 or embnic2 (continued)
Example:
A:>syscfg --embnic2=onnopxe
embnic2=onnopxe
EmbNic3 or embnic3
Table 30. EmbNic3 or embnic3
Valid Arguments
● On systems prior to YX2X: on, off, onnopxe, onwithiscsi
● On YX2X and later systems: Enabled, EnabledPxe, EnablediScsi, Disabled
Description
Turns the third embedded NIC on with PXE on, off, or on without PXE enabled. This
option is only valid for supported systems that have a NIC. If the NIC is enabled
without PXE, it is not found in the boot order. If the NIC is turned on with PXE, it is
placed at the end of the boot order. The onnopxe argument is not supported on all
systems.
The onwithiscsi argument enables the embedded NIC to boot from the iSCSI
server. The embnic1 option can be replicated.
Example:
A:>syscfg --embnic3=onnopxe
embnic3=onnopxe
EmbNic3Nic4 or embnic3nic4
Table 31. EmbNic3Nic4 or embnic3nic4
Valid Arguments
● On systems prior to YX2X: enable, disable
● On YX2X and later systems: Enabled, Disabled, DisabledOs
Description
Enables or disables the operating system interface of the third and fourth embedded
NIC controllers.
Example:
A:>syscfg --EmbNic3Nic4=enable
--embnic3nic4=enable
EmbNic4 or embnic4
Table 32. EmbNic4 or embnic4
Valid Arguments
● On systems prior to YX2X: on, off, onnopxe, onwithiscsi
● On YX2X and later systems: Enabled, EnabledPxe, EnablediScsi, Disabled
SYSCFG 41