CLI Guide

Table 21. SYSCFG Options Supported — HddSeq or devseq (continued)
Example 2:
A:>syscfg --devseq= hdd.emb.1,scsiraid.emb.1
The following devices are set in the disk device sequence:
Device 1:* hdd.emb.0 - System BIOS boot devices
Device 2:* scsiraid.emb.1 - AIC-7899, A:00 Seagate
NOTE: The asterisk indicates that the device is enabled in the BIOS.
Boot Settings
You can manage the boot settings using the options in this group.
BootMode or bootmode
Table 22. BootMode or bootmode
Valid Arguments
● On systems prior to YX2X: uefi, bios
● On YX2X and later systems: Uefi, Bios
Description
Determines the boot mode of the system. Allows booting to Unified Extensible
Firmware Interface (UEFI) -capable operating systems or ensures compatibility with
operating systems that do not support UEFI.
NOTE: If boot mode is modified, reboot the system before executing the OS
installation scripts.
Example:
A:>syscfg --bootmode=uefi
bootmode=uefi
BootSeqRetry or bootseqretry
Table 23. BootSeqRetry or bootseqretry
Valid Arguments
● On systems prior toYX2X: enable, disable
● On YX2X and later systems: Enabled, Disabled
Description Enables or disables the boot sequence retry feature. When set to enable, the
system re-attempts to set the boot order after a 30-second time-out if the last boot
attempt has failed. This option can be replicated.
A:>syscfg --bootseqretry=enable
bootseqretry=enable
38 SYSCFG