CLI Guide

Table 20. SYSCFG Options Supported BootSeq or bootseq (continued)

Numerical Lists Examples:

A:>syscfg --bootseq= 2,3,4,5,1,6

The following devices are set in the boot sequence:

Device 2:* usbcdrom.slot.1- USB CD-ROM device

Device 3:* virtualcd.slot.1 – VIRTUAL CDROM

Device 4:* hdd.emb.0 -Hard drive C:

Device 5:* nic.emb.1 - MBA v2.5.12 Slot 0500

Device 1:* virtualfloppy.slot.1 - VIRTUAL FLOPPY

Device 6:* usbfloppy.slot.1 - USB Floppy device

NOTE: The asterisk indicates that the device is enabled in the BIOS.

Device Name Examples:

Example of device names:

nic.slot.1 (network adapter 1 in PCI slot)

nic.emb.1 (network adapter 1 on system board)

hdd.emb.0 (hard drive C:)

cdrom.emb.0 (CD drive)

Device Name Lists Examples

Example 1:

#syscfg --bootseq

The following devices are set in the boot sequence:

Device 2:* cdrom.emb.0 - IDE CD-ROM device

Device 3:* hdd.emb.0 - Hard drive C:

Device 5:* virtual.slot.1 - VIRTUALCDROM DRIVE

Device 1:* floppy.emb.0 - Diskette drive A:1226

Device 6:* virtual.slot.2 - VIRTUALFLOPPY DRIVE

Device 4:* nic.emb.1 - IBA GE Slot 0638 v1226

SYSCFG