CLI Guide

Table 374. RAIDCFG Error Codes and Messages (continued)
Error Code Message
107 Operations on hidden virtual disks are not allowed.
108 Virtual disk is in use.
109 The virtual disk is in use. It cannot be reconfigured at this time.
110 Virtual disk operation is temporarily unavailable. Initialization in
progress.
111 Virtual disk operation is temporarily unavailable. Reconstruction in
progress.
112 Virtual disk operation is temporarily unavailable. Rebuild in progress.
113 Virtual disk operation is temporarily unavailable. Check consistency in
progress.
114 Specified virtual disk too small.
115 Virtual disk operation not supported. Size too small.
116 Operation is temporarily unavailable. Space in use.
117 Cannot reconfigure to the given RAID level.
118 Cannot reconfigure from current RAID level to the given RAID level.
119 One of the array disks selected for the virtual disk is already in use.
120 Virtual disk operation not supported. Cannot use non-RAID disk.
121 Controller Read Configuration failed.
122 Controller Write Configuration failed.
123 Controller cache flush failed.
124 Enable alarm on controller failed.
125 Disable alarm on controller failed.
126 Quiet alarm on controller failed.
127 Controller failed to perform the task.
128 Specified bus not found for controller.
129 Call to set cache mode on the controller failed.
130 Unexpected controller error.
131 Controller out of memory.
132 Invalid controller state.
133 Controller failed.
134 Controller busy.
135 Controller does not exist.
136 Controller name is invalid.
137 Controller is iterated.
138 Rename of virtual disk was not successful.
139 The controller was not able to erase the file system from the specified
virtual disk.
140 The controller was not able to add space to the specified concatenation
set.
Messages And Codes 217