CLI Guide

Table 336. Enumerating Virtual Disks (continued)
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
Example:
A:>raidcfg -vd -c=4
Controller: PERC H710P Adapter
VDisk ID: 0
Virtual Disk Name: Virtual Disk 0
Size: 857344 MB (837 GB)
Type: RAID 0
Read Policy: Adaptive Read Ahead
Write Policy: Write Back
Cache Policy: Disabled
Stripe Size: 64
Drives: 0:0:1,0:1:1
BootVD: No
T10 Protection Info: Disabled
RAIDCFG Command successful!
-vd -c=id or vdisk
controllerid= id
-vd or vdisk
<valid virtual disk ID
number>
Displays details about a single virtual disk under
the indicated controller. The -vd -c= id option
combination is mandatory. The second -vd option
is optional and can be added to the command line
in any order after the mandatory option
combination.
Example:
A:>raidcfg -vd -c=2 -vd=0
Controller: PERC H710P Adapter
VDisk ID: 0
virtual Disk Name: Virtual Disk 0
Size: 857344 MB (837 GB)
Type: RAID 0
Read Policy: Adaptive Read Ahead
Write Policy: Write Back
Cache Policy: Disabled
Stripe Size: 64
Drives: 0:0:1,0:1:1
BootVD: No
T10 Protection Info: Disabled
RAIDCFG Command successful!
Deleting Virtual Disks
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for deleting virtual disks.
Table 337. Deleting Virtual Disks
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-vd -ac=dvd -
c=id
or
vdisk
action=deletevdis
k controllerid=id
NA NA
Deletes all virtual disks on the indicated
controller. This option combination is mandatory.
180 RAIDCFG