CLI Guide

Table 313. powerbutton
Option Sub-option Valid Arguments Description
Example:
A:>syscfg --powerbutton=enable
powerbutton=enable
powerctl
Table 314. powerctl
Option Sub-option Valid Arguments Description
--powerctl
NA
powerdown
Performs a chassis powerdown and controls the
reset of the system.
Powerdown turns off the system.
powercycle
Turns off the system and automatically turns on
your system after a few seconds.
reset
Resets the system.
softshutdown
In Linux, the system turns off immediately.
NOTE: In Windows PE, this option does not
work.
NOTE: This option applies only to PowerEdge
systems that are configured with a BMC.
NOTE: This argument requires ACPI support
to function properly.
racreset
Table 315. racreset
Option Sub-option Valid Arguments Description
--racreset*
NA NA Resets the RAC. It cannot be accompanied with
any other option. This option cannot be
replicated.
serialcfgparams
Table 316. serialcfgparams
Option Sub-option Valid Arguments Description
serialcfgparams
or scp
Configures and displays serial configuration
parameters. This option can be replicated.
--connectionmode basic, terminal
Sets the connection mode used to perform
IPMI messaging to the BMC. This sub-option
can be replicated.
--msgcomm noflowctrl,
rtscts
Sets the IPMI message communication flow
control. This suboption can be replicated.
144 SYSCFG