CLI Guide

Table 311. pefcfgparams (continued)
Option Sub-option Valid Arguments Description
address in response to a chassis intrusion
event):
A:>syscfg pefcfgparams --
filter= intrusion--
filteralert=disable
pefcfgparams filter= intrusion
filteralert=disable
Table 312. pefcffgparams
Option Sub-option Valid
Arguments
Description Applicable Systems
pefcfgparams
or pcp
Configures and displays PEF
configuration parameters. This option
can be replicated.
All PowerEdge systems
--filter fanfail,
voltfail,
discretevolt
fail,
tempwarn,
tempfail,
intrusion,
redundegrade
d,redunlost,
procwarn,
procfail,
powerwarn,
powerfail,
hardwarelogf
ail,
autorecovery
,
batterywarn,
batteryfail,
powerabsent,
procabsent,
systempowerw
arn,
systempowerf
ail
Specifies a PEF value. This sub-
option can be replicated.
For a complete list of all possible PEF
messages along a description of each
event, see BMC Platform Events
Filter Alert Messages
NOTE: The fanfail option is
not supported on PowerEdge 10G
systems.
--filteraction powercycle,
reset,
powerdown,
power
reduction,
none
Sets the event filter action for the
filter specified using the filter
sub-option. This sub-option depends
on the filter sub-option. This sub-
option can be replicated.
--hostname <string>
Sets the host name (maximum of 62
printable ASCII characters) for the
BMC. This sub-option can be
replicated.
The hostname string must comprise
only the followig characters: hyphen
(-) , underscore (_) , and period (.) .
142 SYSCFG