CLI Guide

lanchannelinfo
Table 305. lanchannelinfo
Option Sub-option Valid Arguments Description
lanchannelinfo or
lci
NA NA Displays media and protocol information about
the LAN channel. This option cannot be
replicated.
lanuseraccess
Table 306. lanuseraccess
Option Sub-option Valid Arguments Description
lanuseraccess
or lua
Configures the privilege level and channel
accessibility associated with a specified
User ID for the LAN channel.
--userid
2–16, if your system
has a DRAC 5
controller
Sets the User ID. This sub-option can be
replicated.
--usrprivlmt user, operator,
administrator,
noaccess
Sets the maximum BMC user privilege level
for the LAN channel for the userid specified
using the useridsub-option. This sub-
option can be replicated. This sub-option is
dependent on the userid sub-option.
--currentenableduserids
NA Reports the number of currently enabled
User IDs on the LAN channel.
--useridswithfixednames
NA
Reports the number of User IDs with fixed
names on the LAN channel.
Example 1 (to enable User ID 2 on the LAN
channel with administrator privileges):
A:>syscfg lanuseraccess --
userid=2 --
usrprivlmt=administrator
Example 2 (to enable User ID 4 on the LAN
channel with user privileges):
A:>syscfg lanuseraccess --
userid=4 --usrprivlmt=user
loaddefaults
Table 307. loaddefaults
Option Sub-option Valid Arguments Description
--loaddefaults*
NA NA
Restores the BMC to the defaults originally loaded
on the controller. This option is used to return the
BMC to a known-good state. This option cannot
be replicated.
NOTE: The NMI, power button, and SOL
defaults are not reset by using this option.
138 SYSCFG