CLI Guide

Table 291. Sub Options And Arguments For power Option (continued)
Option Sub-option Arguments Description
Example:
A:>syscfg power --cap=<value> --
unit=watt --setuppwdoverride
--maxpowercap
Displays the value of the maximum power threshold.
--minpowercap
Displays the value of the minimum power threshold.
--valsetuppwd
<string>
Validates the setup password for power authentication.
If you try to change the DTK settings, you are
prompted to enter this password to access the
settings. For more information on delimiters, see
Command Line Option Delimiters.
A:>syscfg power --profile=
maxperformance --valsetuppwd=
<setup_password>
--
setuppwdoverride
NA
Does not prompt you for a password to access the DTK
settings on systems that do not have a setup password
configured.
A:>syscfg power --profile=
maxperformance –setuppwdoverride
Sub Options And Arguments For tcm Option
Table 292. Sub Options And Arguments For tcm Option
Option Sub-option Arguments Description
tcm --tcmsecurity
off Does not report the presence of TCM to the operating
system.
on
Reports the presence of TCM to the operating system.
Example:
A:>syscfg tcm --tcmsecurity=off
--tcmactivation
enabled Enables and activates the TCM feature.
disabled Disables and deactivates the TCM feature.
nochange
Does not alter the operational state of the TCM
feature.
Example:
A:>syscfg tcm --tcmactivation=enabled
--tcmclear
NA Clears the contents of the TCM chip without erasing
the tcmsecurity and tcmactivation settings.
128 SYSCFG