CLI Guide

Table 288. usb (continued)
Example:
A:>syscfg --usb=on
usb=on
usbflash
Table 289. usbflash
Valid Arguments auto, fdd, hdd
Description
Sets or reports the emulation for an USB flash device. The USB flash device can be
set to emulate a hard drive (HDD) or a diskette drive (FDD). This option can be
replicated.
Example:
A:>syscfg --usbflash=auto
usbflash=auto
vflash
Table 290. vflash
Valid Arguments enable, disable
Description
Enables or disables vflash on iDRAC.
Example:
A:>syscfg --vflash=enable
vflash=enable
Sub Options And Arguments For power Option
Table 291. Sub Options And Arguments For power Option
Option Sub-option Arguments Description
power --profile
<powerprofile>
where powerprofile can
be maxperformance,
osctl, apc
Displays the settings similar to the BIOS setup screen
for the respective profile. Reboot the system for the
settings to take effect.
If power profiles are not available on the platform, an
error message is displayed.
A:>syscfg power--
profile=maxperformance --
setuppwdoverride
126 SYSCFG