CLI Guide

lcd2
Table 268. lcd2
Option Sub-option Valid Arguments Description
--lcd1
NA <string>
Sets the second line of user-defined text on the
system LCD. This option can be replicated. For
more information on delimiters, see Command
Line Option Delimiters.
lpt
Table 269. lpt
Valid Arguments lpt1, lpt2, lpt3, disable
Description
Configures or reports the I/O address of the LPT (parallel) port. This option is
available on all supported systems with an LPT port. This option is recorded to an
output file for replication.
Example:
A:>syscfg --lpt=lpt1
lpt=lpt1
memdynamicpower
Table 270. memdynamicpower
Valid Arguments enable, disable
Description
Enables or disables the dynamic memory power states. This option can be replicated.
Example:
A:>syscfg --memdynamicpower=enable
memdynamicpower=enable
memintleave
Table 271. memintleave
Valid Arguments enable, disable
Description
Enables or disables the memory interleave mode. This option can be replicated.
Example:
A:>syscfg --memintleave=enable
memintleave=enable
NOTE: The memintleave option is same as Nodeinterleave option. For
more information, see Memory Settings group.
120 SYSCFG