CLI Guide

Table 261. floppy (continued)
Example:
A:>syscfg --floppy=auto
floppy=auto
formfactor
Table 262. formfactor
Valid Arguments read-only
Description
Displays the geometry of PowerEdge Blade systems. The option can have the
following values: halfheight (the Blade systems occupies 1 slot of the chassis),
halfheight, dualwide (the Blade system occupies 2 horizontal slots of the chassis),
fullheight (the Blade system occupies 2 vertical slots of the chassis), fullheight,
dualwide (the Blade system occupies 4 slots of the chassis) and quarterheight
(the Blade systems occupies half slot of the chassis).
Example:
A:>syscfg --formfactor=fullheight, dualwide
formfactor=fullheight, dualwide
hpcmode
Table 263. hpcmode
Valid Arguments enable, disable
Description
Enables or disables the High Performance Computing (HPC) Mode. When set to
enable, the HPC is enabled utilizing only the high frequency P-State settings. When
set to disable (default value), all P-States inherent to the CPU are used.
To fully enable HPC Mode, set the power management to custom, cpu power and
performance management to OsDbpm, and fan power and performance management
to maximum performance.
Example:
A:>syscfg --hpcmode=enable
hpcmode=enable
htassist
Table 264. htassist
Valid Arguments enable, disable
Description
Enables or disables the Probe Filter chipset option. Some applications may have
lower performance when the chipset feature is disabled.
118 SYSCFG