CLI Guide

assignintr
Table 244. assignintr
Valid Arguments standard, distributed
Description Controls the interrupt assignment of PCI devices in the system. This option is set to
standard by default, causing standard interrupt routing that uses interrupt A, B, C,
and D for all PCIe devices. When set to distributed, the interrupt routing is swizzled
at the MCH root ports to minimize sharing of interrupts across all PCIe (and PCI-X in
the Programmable Interrupt Controller (PIC) mode) devices.
Example:
A:>syscfg --assignintr=standard
assignintr=standard
bezelir
Table 245. bezelir
Valid Arguments enable, disable
Description Enables or disables the ESM to monitor and log front bezel intrusion conditions.
Example:
A:>syscfg --bezelir=enable
bezelir=enable
cmosdefaults
Table 246. cmosdefaults
Valid Arguments enable, disable
Description
Enables or disables the request for a default CMOS value during the next reboot.
A:>syscfg --cmosdefaults=enable
cmosdefaults=enable
conboot
Table 247. conboot
Valid Arguments enable, disable
Description
Enables or disables configuring or reporting of console redirection after reboot. This
option is available on all supported systems that support console redirection. This
option can be replicated.
SYSCFG 113