CLI Guide

Table 239. TpmPpiBypassProvision (continued)
● On YX4X and later systems: Enabled, Disabled
Description
When set to Enabled, allows the Operating System to bypass Physical Presence
Interface (PPI) prompts when issuing PPI Advanced Configuration and Power
Interface (ACPI) provisioning operations.
Example:
A:>syscfg --tpmPpiByPassProvision=Enabled
tpmPpiBypassProvision=Enabled
UEFI Boot Settings
You can manage the UEFI settings using the options in this group.
UefiBootSeq
Table 240. UefiBootSeq
Valid Arguments
● On systems prior to YX2X: NA
● On YX2Xand later systems: list of device names separated by commas
Description
Enables, disables, and orders the devices in a UEFI boot order list. Only the devices
present on the system are listed in the UefiBootSeq. The first option in the list is
attempted first. If the first option is not successful, the second option is attempted,
and so on. The system attempts to launch only the enabled boot options and does
not launch disabled boot options. This option is applicable when bootmode is set to
UEFI and has no effect when bootmode is set to BIOS.
NOTE: Only the devices listed in the bootseq are enabled.
DTKTORACADM
The DTK SYSCFG deployment scripts are converted to equivalent RACADM scripts, that helps in migration to utilize RACADM in
the deployment solution. The utility has the conversion tool for converting the SYSCFG scripts in both environments: Microsoft
Windows and Linux operating systems. Starting 12th generation of PowerEdge servers and later, selected set of SYSCFG
commands are a part of the DTK sample scripts. The list of DTK sample scripts are present in \Toolkit\Tools\CONVERTER
\windows_scripts.lst for Microsoft Windows operating systems and toolkit/Converter/ linux_scripts.lst
for Linux operating system. The converted scripts are available in the folder racscripts.
Table 241. DTKTORACADM Command on Windows Operating System
Valid Arguments dtktoracadm.exe or dtktoracadm.exe windows_scripts.lst debug
Description On systems running Windows operating system, run the command, where
windows_scripts.lst is the input file which contains the list of path to run the
RACADM scripts and debug is an option which list the file status.
Applicable Systems
All PowerEdge 12 and later systems.
108 SYSCFG