CLI Guide

Table 230. TpmSecurity or tpmsecurity (continued)
Description
Controls the reporting of the Trusted Platform Module (TPM) in the system.
NOTE: The tpmsecurity option is a sub-option of tpm.
Example:
A:>syscfg --tpmsecurity=off
tpmsecurity=off
TpmStatus
Table 231. TpmStatus
Valid Arguments
● On systems prior to YX2X: NA
● On YX2X and later systems: read-only
Description
Displays the current status of TPM.
Example:
A:>syscfg --TpmStatus
TpmInfo
Table 232. TpmInfo
Valid Arguments
● On systems prior to YX3X: NA
● On YX3X and later systems: read-only
Description
Displays the TPM type and firmware version.
Example:
A:>syscfg --TpmInfo
TpmCommand
Table 233. TpmCommand
Valid Arguments
● On systems prior to YX3X: NA
● On YX3X and later systems: None, Activate, Deactivate, Clear
Description
Configures the Trusted Platform Module (TPM).
● None
— Commands are not sent to the TPM.
● Activate — TPM is enabled.
● Deactivate — TPM is disabled.
● Clear — All the contents of TPM are cleared.
SYSCFG 105