CLI Guide

TcmActivation or tcmactivation
Table 225. TcmActivation or tcmactivation
Valid Arguments
● On systems prior to 12G: enabled, disabled, and nochange
● On 12G systems: NoChange, Activate, Deactivate
Description
Allows the user to change the operational state of the Trusted Cryptography Module
(TCM). This field is read-only when TCM Security is set to Off.
NOTE: The tcmactivation option is a sub-option of tcm.
Example:
A:>syscfg --tcmactivation=enabled
tcmactivation=enabled
Applicable Systems All systems prior to PowerEdge 13G systems.
TcmClear or tcmclear
Table 226. TcmClear or tcmclear
Valid Arguments
● On systems prior to YX3X: Yes, No
● On YX3X systems: NA
Description
CAUTION: Clearing the TCM will cause loss of all keys in the TCM. This
could affect booting of the operating system.
When set to Yes, all the contents of the TCM will be cleared. This field is read-only
when TCMSecurity is set to Off.
NOTE: The tcmclear option is a sub-option of tcm.
Example:
A:>syscfg --TcmClear=Yes
TcmClear=Yes
TcmSecurity or tcmsecurity
Table 227. TcmSecurity or tcmsecurity
Valid Arguments
● On systems prior to YX2X: on, off
● On YX2X and later systems: On, Off
Description
Controls the reporting of the Trusted Cryptography Module (TCM) in the system.
NOTE: The tcmsecurity option is a sub-option of tcm.
SYSCFG 103