CLI Guide

Table 217. AesNi (continued)
Example:
A:>syscfg --AesNi=Enabled
AesNi=Enabled
IntelTxt or inteltxt
Table 218. IntelTxt or inteltxt
Valid Arguments
● On systems prior to YX2X: enable, disable
● On YX2X and later systems: On, Off
Description
Turns the Trusted Execution Technology on or off. To enable Intel TXT, VT must be
enabled, and the TPM must be enabled with pre-boot measurements and activated.
Example:
A:>syscfg --inteltxt=enable
inteltxt=enable
NOTE: To enable the Intel TXT option in a supported processor, make sure that
the:
● Virtualization technology in Processor setting is enabled.
● TPM module is installed and initialed as OK by BIOS.
● TPM security in System security is set to on with pre-boot measurements.
● User password is not set.
NmiButton or nmibutton
Table 219. NmiButton or nmibutton
Valid Arguments
● On systems prior to YX2X: enable, disable
● On YX2X and later systems: Enabled, Disabled
Description
Enables or disables the Non-Maskable Interrupt (NMI) button on the front panel.
The NMI button can be used to alert the operating system in certain cases.
NOTE: This option configures Baseboard Management Controller (BMC) and
Remote Access Controller (RAC) settings.
Example:
A:>syscfg --nmibutton=enable
nmibutton=enable
100 SYSCFG