Users Guide

Toolkit Components Purpose
cong.ini
Conguration le used by raidcfg.exe.
CAUTION: Do not edit this le. Incorrect edits might cause raidcfg.exe to
fail.
stsvc.ini
Conguration le used by raidcfg.exe.
CAUTION: Do not edit this le. Incorrect edits might cause raidcfg.exe to
fail.
sys.ini
Conguration le used by DTK for deployment.
IDRAC
Congures iDRAC 6.
NOTE: This feature may not be supported on all systems.
IDRAC7
Congures iDRAC7.
NOTE: This feature may not be supported on all systems.
RAC 5
Congures DRAC 5/iDRAC.
pci.ids
Reports PCI devices when used with syscfg.exe.
disclaimer.txt
Displays the disclaimer for the tools.
RaidcfgErrorCodes.txt
Lists the error codes and messages for the raidcfg.exe tool.
SyscfgErrorCodes.txt
Lists the error codes and messages for the syscfg.exe tool.
CONVERTER
Has the utility dtktoracadm.exe to convert the SYSCFG scripts to equivalent RACADM
scripts. The le is located in Toolkit\Tools\CONVERTER.
dtktoracadm_dict.map
Displays the list of SYSCFG commands converted to equivalent RACADM commands.
windows_scripts.lst
Displays the list of input SYSCFG sample scripts available to be converted to RACADM
scripts.
For example, in the prompt, type the command: dtktoracadm.exe
windows_scripts.lst. The command converts the list of sample .BAT les in the input
le.
racscripts
The racscripts folder is empty before running the utility command. After the .exe script is run,
the SYSCFG scripts converted to equivalent RACADM scripts are available in this folder.
changed_tokens.log
Displays the converted RACADM scripts log.
unchanged_tokens.log
Displays the RACADM scripts logs which are not converted.
System utilities and supported les For Linux
The following table lists the les, at /opt/dell/toolkit/bin and the supporting libraries located in /opt/dell/toolkit/lib on systems running the
Linux operating system. The les are the core tools (utilities) that perform preoperating system conguration and deployment tasks. See
Downloading DTK
25