Release Notes
• QLogic 2x25GE QL41262HMCU CAN.
• Intel(R) Ethernet 25G 2P XXV710 Adapter.
• Intel(R) Ethernet 10G 2P X550-t Adapter.
• Intel(R) Gigabit 4P I350-t Adapter.
• Intel(R) 10GbE 4P X710-t Adapter.
• Intel(R) 4P X550 rNDC.
• ConnectX-5 Dual Port 100 GbE QSFP Network Adapter.
• ConnectX-4 Dual Port 100 GbE QSFP Network Adapter.
• ConnectX-5 Single Port VPI EDR QSFP28 Adapter.
• Support for installation and deployment of the following operating systems in BIOS and UEFI mode:
• Red Hat Enterprise Linux 7.5 (64–bit)
• Red Hat Enterprise Linux 6.10 (64–bit)
• SUSE Linux Enterprise Server 15 (64–bit)
• Added support for the following Dell PowerEdge servers:
• PowerEdge R240
• PowerEdge R340
• PowerEdge T140
• PowerEdge T340
• PowerEdge R740xd2
NOTE: For the list of supported operating systems and Dell servers, see the
Dell Systems Software Support Matrix
at dell.com/
openmanagemanuals.
Important Notes
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
Use both DTK and the Server Administrator from the same release version to get complete supported features of Server Administrator.
DTK operating system deployment limitation:
DTK does not support operating system deployment, when multiple boot VDs exist on a single controller or when the server has multiple
boot controllers. If multiple boot controllers exist on the server, the boot VD must be created on any one of the controllers, and the boot
VD must be set as first boot device in system BIOS.
On debranded or rebranded servers, Deployment toolkit is not supported.
DTK does not support Linux operating system deployment in Non RAID (Volume) and SWRAID mode on s140 controllers.
SYSCFG
• Some options may not be present on all systems, which may be due to the BIOS version or hardware feature set. The usage
information generated by running SYSCFG without arguments shows only those options that are valid for your system.
• The --devseq option is present only if you have an available, bootable hard-disk partition. If this option is present in the configuration
file, but not present on your system, you will receive a usage error.
• To enable certain options, to reboot your system. Dell recommends you use the "reboot" command on shell prompt or press the Ctrl
+Alt+Del keys.
• It is required to perform a warm reboot after applying the SYSCFG settings changes on Dell’s 12th generation of PowerEdge systems.
• If you perform operations that change the --redmem option, reboot your system immediately. It is applicable to both command line
and --infile usage.
NOTE:
Additionally, the --redmem option should not be issued with any other command and should be immediately followed
by a system reboot. This is important when you develop scripts that can alter the --redmem setting.
• For options that use text strings such as username, password, hostname, and community string, using characters such as "<," ">," "|,"
"=" on the command line can be misinterpreted by the command line parser and may cause errors. To avoid such errors, use only
alphanumeric characters.
• If you set the username using SYSCFG username option, Serial Over Lan (SOL) access for the corresponding user will be enabled by
default. You can disable SOL access for a user using syscfg solaction --userid=--action=disable command.
Dell EMC OpenManage Deployment Toolkit 6.2 for Embedded Linux Release Notes
3