Install Guide

• Windows ADK for Windows Server 2016 to build Windows PE 10.0

• Working knowledge of Microsoft Remote Installation Services (RIS) and Automated Deployment Services (ADS) (including setting up of

RIS and ADS environments) or any other third party deployment system or tool for Windows PE.

• Working knowledge of Windows Deployment Services (WDS) or any other third party deployment system or tool for Windows PE.

• A workstation with the following capabilities:

– Writable media drive

– Network access

• A target system with a media drive, if performing a local deployment.

• A target system with a media drive and network access, if performing a network deployment.

• All DTK utilities, sample scripts, and sample conguration les.

• Dell EMC OpenManage Systems Management Tools and Documentation DVD.

• Your operating system software and documentation.

• An optimally congured source system with network access.

NOTE: You can download the latest drivers from www.dell.com/support.

Preparing Windows PE environment for deployment

If you are using the Windows PE environment:

1 Copy or extract DTK utilities, sample scripts, sample conguration les, and drivers provided (in the zip le) to the Windows PE image.

2 Organize DTK utilities, script les, conguration les, the operating system installation les, and the required system les and drivers on

a network share or local media.

3 Set up a Source System using the Dell EMC OpenManage Systems Management Tools and Documentation DVD (to install the

operating system) and the Systems Service and Diagnostics Tools (to load drivers). The Source System acts as a master server that

is used to replicate settings to the Target Servers.

NOTE

: Download the latest drivers from support.dell.com.

4 Generate a system BIOS, BMC, RAID, and/or RAC/iDRAC conguration prole from the Source System. Copy the generated

conguration les to a read/write share on the workstation or server.

NOTE

: You can obtain the system BIOS, BMC, RAID, and/or RAC/iDRAC conguration les by booting from DTK Windows

PE image and running the SYSCAP.BAT, RAIDCAP.BAT, and RACCAP.BAT scripts.

5 Create an operating system answer le that contains unattended operating system software installation information.

6 To set up the system BIOS, BMC, RAID, and RAC/iDRAC and then, install an operating system on a Target Server, edit DTK sample

script les that access the system conguration les.

Installing Windows server Operating System using DTK

To install Windows Server operating system using DTK:

1 On the source system, create an operating system-specic folder. For example, WinServer_deploy.

2 Make WinServer_deploy folder shareable.

3 In the folder WinServer_deploy, create two folders sources and platform name (for example, PER740).

NOTE

: The platform name must be a DTK standard name. To know the platform name, run TKENVSET.BAT located in the x:

\Dell\Toolkit\Template\Scripts directory, and then run the SET command. In the Details section, see the DT_PLATFORM

name.

4 Copy the contents of the operating system media to the sources folder.

5 In the folder PER740, create a folder Out-of-Box Drivers.

6 Boot the target system with DTK Windows PE image.

Introduction