CLI Guide
Applicable Systems PowerEdge 14G and later systems
HttpDevnProtocol
Table 68. HttpDevnProtocol
Valid Arguments
• On systems prior to 14G: NA
• On 14G and later systems: IPv4, IPv6
Description Determines whether the Internet Protocol version 4 older version or the Internet Protocol
version 6 the newest version is used for this device. The value of n in
HttpDevnProtocol can be from 1 to 4.
Example:
A:>syscfg --HttpDev2Protocol=IPv4
HttpDev2Protocol=IPv4
Applicable Systems PowerEdge 14G and later systems
HttpDevnVlanEnDis
Table 69. HttpDevnVlanEnDis
Valid Arguments
• On systems prior to 14G: NA
• On 14G and later systems: Enabled, Disabled
Description Set the eld to Enabled if your DNS or HTTP servers reside on a Virtual LAN (VLAN). The
value of n in HttpDevnVlanEnDis can be from 1 to 4.
Example:
A:>syscfg --HttpDev3VlanEnDis=Enabled
HttpDev3VlanEnDis=Enabled
Applicable Systems PowerEdge 14G and later systems
HttpDevnVlanId
Table 70. HttpDevnVlanId
Valid Arguments
• On systems prior to 14G: NA
• On 14G and later systems: Enabled, Disabled
Description When VLAN is enabled, identies which of the 4094 possible VLANs contains the desired
DNS or HTTP servers. This value can be 1 – 4094 inclusive. Where n is from 1 to 4.
Example:
A:>syscfg --HttpDev2VlanId=Enabled
SYSCFG 63