CLI Guide

Example:
A:>syscfg --IscsiDev1Con1VlanId
IscsiDev1Con1VlanId=
XXXX
Applicable Systems PowerEdge 14G and later systems
IscsiDev1Con n Auth
Table 60. IscsiDev1Con n Auth
Valid Arguments
• On systems prior to 14G: NA
• On 14G and later systems: None, Chap
Description
Sets the authentication type of the iSCSI connection. Where the value of n in
IscsiDev1ConnAuth can be 1 or 2.
Example:
A:>syscfg --IscsiDev1Con1Auth=None
IscsiDev1Con1Auth=None
Applicable Systems PowerEdge 14G and later systems
Network Settings
You can manage the system network settings using the options in this group.
PxeDev n EnDis
Table 61. PxeDev
n EnDis
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the Preboot Execution Environment (PXE) device. When enabled, a
Unied Extensible Firmware Interface (UEFI) boot option is created for the PXE device.
NOTE: The value of n in PxeDevnEnDis can be 1–4.
Example:
A:>syscfg --PxeDev1EnDis=Enabled
PxeDev1EnDis=Enabled
Applicable Systems PowerEdge 12G and later systems
60 SYSCFG