CLI Guide

EmbNic1Nic2 or embnic1nic2
Table 29. EmbNic1Nic2 or embnic1nic2
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled, DisabledOs
Description
Enables or disables the operating system interface of the rst and second embedded NIC
controllers.
Example:
A:>syscfg --embnic1nic2=enable
--embnic1nic2=enable
Applicable Systems PowerEdge 11G and later systems
EmbNic2 or embnic2
Table 30. EmbNic2 or embnic2
Valid Arguments
• On systems prior to 12G: on, o, onnopxe, onwithiscsi
• On 12G and later systems: Enabled, EnabledPxe, EnablediScsi, Disabled
Description
Turns the second embedded NIC on with PXE on, o, or on without PXE enabled. This
option is only valid for supported systems that have a NIC. If the NIC is enabled without
PXE, it is not found in the boot order. If the NIC is turned on with PXE, it is placed at the
end of the boot order. The onnopxe argument is not supported on all systems.
The onwithiscsi argument enables the embedded NIC to boot from the iSCSI server. The
embnic1 option can be replicated.
Example:
A:>syscfg --embnic2=onnopxe
embnic2=onnopxe
Applicable Systems All PowerEdge systems
EmbNic3 or embnic3
Table 31. EmbNic3 or embnic3
Valid Arguments
• On systems prior to 12G: on, o, onnopxe, onwithiscsi
• On 12G and later systems: Enabled, EnabledPxe, EnablediScsi, Disabled
Description
Turns the third embedded NIC on with PXE on, o, or on without PXE enabled. This option
is only valid for supported systems that have a NIC. If the NIC is enabled without PXE, it is
SYSCFG 49