CLI Guide

Error Code Message
98 Virtual disk Create - Read-write failed.
99 Virtual disk - Clear-to-zero failed.
100 Virtual Disk Requires Non Multilevel.
101 Virtual Disk Promote Operation failed.
102 Specified virtual disk has no drive letter assigned to it.
103 Cannot expose virtual disk.
104 Cannot reconfigure virtual disk.
105 Cannot stop the reconfiguration of the virtual disk.
106 SMART report count not supported.
107 Operations on hidden virtual disks are not allowed.
108 Virtual disk is in use.
109 The virtual disk is in use. It cannot be reconfigured at this time.
110 Virtual disk operation is temporarily unavailable. Initialization in
progress.
111 Virtual disk operation is temporarily unavailable. Reconstruction in
progress.
112 Virtual disk operation is temporarily unavailable. Rebuild in progress.
113 Virtual disk operation is temporarily unavailable. Check consistency in
progress.
114 Specified virtual disk too small.
115 Virtual disk operation not supported. Size too small.
116 Operation is temporarily unavailable. Space in use.
117 Cannot reconfigure to the given RAID level.
118 Cannot reconfigure from current RAID level to the given RAID level.
119 One of the array disks selected for the virtual disk is already in use.
120 Virtual disk operation not supported. Cannot use non-RAID disk.
121 Controller Read Configuration failed.
122 Controller Write Configuration failed.
123 Controller cache flush failed.
124 Enable alarm on controller failed.
125 Disable alarm on controller failed.
126 Quiet alarm on controller failed.
127 Controller failed to perform the task.
128 Specified bus not found for controller.
129 Call to set cache mode on the controller failed.
238 Messages And Codes