CLI Guide

Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
action=removeglob
alhotspare
controllerid=id
adisk|
pdisk=channel:tar
get:enclosure
Example:
A:>raidcfg -ctrl -ac=rghs -c=2-
ad=0:1,0:2
RAIDCFG Command successful!
Importing And Clearing Foreign Congurations
The following table lists the RAIDCFG options, parameters, and pre-dened arguments for foreign congurations.
Table 349. RAIDCFG Options for Foreign Congurations
Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=fgnimp
or
controller
controllerid=id
ac
tion=foreignimpor
t
NA NA
Imports the foreign conguration detected in the
selected controller. This feature is supported on PERC
5 and later controllers and is not supported on SAS
controllers.
If you use this argument on a controller that does not
have a foreign conguration, the No Foreign
configuration present in the
controller message is displayed.
NOTE: For importing secured foreign
conguration, use
importsecureforeignconfig or isfc.
For more details, see Importing Secured
Foreign Congurations.
Example:
A:>raidcfg -ctrl -c=2 -ac=fgnimp
-ctrl -c=id -ac=
fgnclr
or
controllercontrol
lerid=id
foreignclear
NA NA
Clears the foreign conguration detected in the
selected controller. This feature is supported on PERC
5 and later controllers and is not supported on SAS
controllers..
If you use this argument on a controller that does not
have a foreign conguration, the No Foreign
configuration present in the
controller message is displayed.
NOTE: For clearing secured foreign
conguration, use instantsecureerase
or insecerase. For more details, see
Erasing Encrypted Physical Disk.
Example:
A:>raidcfg -ctrl -c=2 -ac=fgnclr
RAIDCFG 207