CLI Guide

Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
or
controller
action=
createvdisk
controllerid= id
adisk=
channel:target:
lun,
channel:target:
lun,...
[or
channel:target:
enclosure,...]
command line in any order after the mandatory option
combination. However, do not specify a unit for stripe
size when creating virtual disks. The unit is always
displayed in KB.
For SCSI controllers, the value of LUN should always
be 0.
For SAS controllers, the value of enclosure can be
non-zero, in which case you must specify values for
channel, target, and enclosure.
-ctrl -ac=cvd -
c=id -ad=
ch:targ,ch:targ ,
... [or
ch:targ:encl,...]
or
controller
action=
createvdisk
controllerid= id
adisk=
channel:target:
lun,
channel:target:
lun,... [or
channel:target:
enclosure,..
-str or strict <number>
Strict (-str parameter) is the percentage of expected
array disk utilization.
Example:
A:> raidcfg -ctrl -ac=
cvd -c=0 -ad=0:0,0:1 -
r=1 -str=20
If the unused portion of an array disk is greater than
the mentioned percentage, raidcfg aborts.
For SCSI controllers, the value of LUN should always
be 0.
For SAS controllers, the value of enclosure can be
non-zero, in which case you must specify values for
channel, target, and enclosure.
-ctrl -ac=cvd -
c=id -ad=
ch:targ,ch:targ,
... [or
ch:targ:encl,...]
or
controller
action=
createvdisk
controllerid= id
adisk=
channel:target:
lun,...
channel:target:
lun,... [or
channel:target:
enclosure,...]
-sz or -size <number>
Sets the maximum size of the virtual disk in MB or
GB. A valid argument is a number representing the
maximum size for the virtual disk. The -szoption is
optional and can be the added to the command line in
any order after the mandatory option combination.
The minimum virtual disk size that you can create for
various controllers is as follows:
• For PERC 5 controllers:
– RAID 0: 100 MB
– RAID 1: 100 MB
– RAID 5: 100 MB
• For PERC 6 controllers:
– RAID 0: 100 MB
– RAID 1: 100 MB
– RAID 5: 100 MB
– RAID 6: 100 MB
– RAID 60: 100 MB
• For PERC 7, PERC 8, and PERC 9 controllers:
– RAID 0: 100 MB
194 RAIDCFG