CLI Guide

passwordaction
Table 313. passwordaction
Option Sub-option Valid Arguments Description
passwordaction
Congures and tests the password for the specied
User ID. This option cannot be replicated. All three
sub-options, action, userid, and password
must be included in the command line.
NOTE: This option does not support 20 byte
passwords.
--userid
2–16, if your system has
a DRAC 5 controller
Species the BMC User ID. This sub-option cannot
be replicated.
--action setpassword,
testpassword
Sets or tests the password for the specied User ID.
This sub-option cannot be replicated.
--password <string>
Sets the password (maximum of 16 printable ASCII
characters) for the specied BMC User ID. This sub-
option cannot be replicated.
Example (to set and test the password for User ID 3):
A:>syscfg passwordaction --userid=3
--action=setpassword --
password=bmcmaster passwordaction
userid=3 action=setpassword
password=*********
A:>syscfg passwordaction --userid=3
--action=testpassword --
password=bmcmastor
Password test failed.
pefcfgparams
Table 314. pefcfgparams
Option Sub-option Valid Arguments Description
pefcfgparams or
pcp
Congures and displays PEF conguration
parameters. This option can be replicated.
--filter fanfail,
voltfail,
discretevoltfail,
tempwarn,
tempfail,
intrusion,
redundegraded,red
unlost, procwarn,
procfail,
powerwarn,
powerfail,
Species a PEF value. This sub-option can be
replicated.
For a complete list of all possible PEF messages
along a description of each event, see BMC
Platform Events Filter Alert Messages
162 SYSCFG