CLI Guide

UeBootSeq
Table 241. UeBootSeq
Valid Arguments
• On systems prior to 12G
: NA
• On 12G and later systems
: list of device names separated by commas
Description
Enables, disables, and orders the devices in a UEFI boot order list. Only the devices present
on the system are listed in the UeBootSeq. The rst option in the list is attempted rst. If
the rst option is not successful, the second option is attempted, and so on. The system
attempts to launch only the enabled boot options and does not launch disabled boot
options. This option is applicable when bootmode is set to UEFI and has no eect when
bootmode is set to BIOS.
NOTE: Only the devices listed in the bootseq are enabled.
Applicable Systems All PowerEdge 12 and later systems.
DTKTORACADM
The DTK SYSCFG deployment scripts are converted to equivalent RACADM scripts, that helps in migration to utilize RACADM in the
deployment solution. The utility has the conversion tool for converting the SYSCFG scripts in both environments: Microsoft Windows and
Linux operating systems. Starting 12th generation of PowerEdge servers and later, selected set of SYSCFG commands are a part of the
DTK sample scripts. The list of DTK sample scripts are present in \Toolkit\Tools\CONVERTER\windows_scripts.lst for Microsoft Windows
operating systems and toolkit/Converter/ linux_scripts.lst for Linux operating system. The converted scripts are available in the folder
racscripts.
Table 242. DTKTORACADM Command on Windows Operating System
Valid Arguments dtktoracadm.exe or dtktoracadm.exe windows_scripts.lst debug
Description On systems running Windows operating system, run the command, where windows_scripts.lst is the
input le which contains the list of path to run the RACADM scripts and debug is an option which list
the le status.
Applicable Systems
All PowerEdge 12 and later systems.
Table 243. DTKTORACADM Command on Linux Operating System
Valid Arguments python dtktoracadm.py or python dtktoracadm.py linux_scripts.lst debug
Description On the system running Linux operating system, in the prompt type the command, where
linux_scripts.lst is the input which contains the list of path to run the RACADM scripts and debug is
an option which list the le status.
Applicable Systems
All PowerEdge 12 and later systems.
SYSCFG 127