CLI Guide

NOTE: The tcmsecurity option is a sub-option of tcm.
Example:
A:>syscfg --tcmsecurity=on
tcmsecurity=on
Applicable Systems All PowerEdge systems.
TpmActivation or tpmactivation
Table 229. TpmActivation or tpmactivation
Valid Arguments
• On systems prior to 12G: enabled, disabled, nochange
• On 12G systems: NoChange, Activate, Deactivate
Description
Allows the user to change the operational state of the Trusted Platform Module (TPM). This
eld is read-only when TPM Security is set to Off.
NOTE: The tpmactivation option is a sub-option of tpm.
Example:
A:>syscfg --tpmactivation=enabled
tpmactivation=enabled
Applicable Systems All systems prior to PowerEdge 13G systems.
TpmClear or tpmclear
Table 230. TpmClear or tpmclear
Valid Arguments
• On systems prior to 12G: NA
• On 12G systems: Yes, No
Description
CAUTION: Clearing the TPM will cause loss of all keys in the TPM. This could aect booting of
the operating system.
When set to Yes, all the contents of the TPM will be cleared. This eld is read-only when TCMSecurity
is set to Off.
NOTE: The tpmclear option is a sub-option of tpm.
Example:
A:>syscfg --TpmClear=Yes
TpmClear=Yes
Applicable Systems All systems prior to PowerEdge 13G systems.
122 SYSCFG