CLI Guide

Example:
A:>syscfg --RedirAfterBoot=Enabled
RedirAfterBoot=Enabled
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SerialComm or serialcomm
Table 188. SerialComm or serialcomm
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: on, com1cr, com2cr, o
• On Dell’s 12th generation PowerEdge and later systems: OnNoConRedir,
OnConRedirCom1, OnConRedirCom2, O
Description Enables or disables the serial communication devices (Serial Device 1 and Serial Device 2) in
BIOS.
Example:
A:>syscfg --SerialComm=OnNoConRedir
SerialComm=OnNoConRedir
Applicable Systems All Dell’s 12th generation PowerEdge and later systems
SerialPortAddress or serialportaddrsel
Table 189. SerialPortAddress or serialportaddrsel
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: default, alternate
• On Dell’s 12th generation PowerEdge and later systems: Serial1Com1Serial2Com2,
Serial1Com2Serial2Com1, Com1, Com2
Description
Sets the port address of the serial devices.
On systems prior to Dell’s 12th generation PowerEdge systems, when this option is default,
Serial Device 1 is set to COM port 1 and Serial Device 2 is set to COM port 2.
On systems prior to Dell’s 12th generation PowerEdge systems, when this option is
alternate, Serial Device 1 is set to COM port 2 and Serial Device 2 is set to COM port 1.
This option can be replicated.
Example:
A:>syscfg --serialportaddrsel=default
serialportaddrsel=default
Applicable Systems Dell’s 11th generation PowerEdge and later systems
106 SYSCFG