CLI Guide

• C6420
• R540
• R6415
• R7415
• R7425
• C4140
• C6320P
• R440
• T440
• M640
• FC640
• T640
• C6400
• Support for the Precision Rack System:
• PR7920
• Support for below Network Cards:
• Intel Ethernet Network Adptr XXV710-DA2
• NetXtreme BCM5719/5720 1Gbps devices
• NetXtreme-E BCM574xx 10Gbps/25Gbps devices
• Mellanox ConnectX-4 Dual Port 100 GbE QSFP Network Adapter
• Intel X550 rNDC
• Intel 10GbE 4P X710
NOTE
: For the list of supported operating systems and Dell servers, see the Dell Systems Software Support Matrix at dell.com/
openmanagemanuals.
NOTE: Use both DTK and the Server Administrator from the same release version to get complete supported features of Server
Administrator.
SYSCFG equivalent RACADM commands
The DTK SYSCFG deployment scripts are converted to equivalent RACADM scripts, that helps in migration to utilize RACADM in the
deployment solution. Starting 12th generation of PowerEdge servers and later, selected set of SYSCFG commands are a part of the DTK
sample scripts. The utility has the conversion tool for converting the SYSCFG scripts in both environments Microsoft Windows and Linux
operating systems. The list of DTK sample scripts are present in \Toolkit\Tools\CONVERTER\ windows_scripts.lst for Microsoft Windows
operating systems and toolkit/Converter/ linux_scripts.lst for Linux operating system. The converted scripts are available in the folder
racscripts. The set of converted commands are available in dtktoracadm_dict.map.
The following table lists the set of commands:
Table 1. SYSCFG equivalent RACADM commands
Group SYSCFG Commands Equivalent RACADM Commands
iDRAC Settings
lcp --dnsdhcp iDRAC.IPv4.DNSFromDHCP
lcp --domainname iDRAC.NIC.DNSDomainName
lcp --dnsracname iDRAC.NIC.DNSRacName
lcp --dnsregisterrac iDRAC.NIC.DNSRegister
--idractype iDRAC.Info.Type -z legacy
Introduction 9