CLI Guide

DcuIpPrefetcher
Table 100. DcuIpPrefetcher
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description
Enables (default value) or disables DCU IP Prefetcher.
Example:
A:>syscfg --DcuIpPrefetcher=Enabled
DcuIpPrefetcher=Enabled
Applicable Systems PowerEdge 12G and later systems
DcuStreamerPrefetcher or dcustreamerprefetcher
Table 101. DcuStreamerPrefetcher or dcustreamerprefetcher
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables DCU Streamer Prefetcher. This option can be replicated.
Example:
A:>syscfg --dcustreamerprefetcher=enable
dcustreamerprefetcher=enable
Applicable Systems PowerEdge 11G and later systems
LogicalProc or logicproc
Table 102. LogicalProc or logicproc
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the logical processors of a system. When this option is set to Enabled
(default value), the BIOS reports all logical processors. When set to Disabled, the BIOS
only reports one logical processor per core. Each processor core supports maximum two
logical processors. This option is available on all systems that support logical processing
(Hyperthreading).
This option can be replicated.
76 SYSCFG