CLI Guide

Example:
A:>syscfg --usbports=enable
usbports=enable
Applicable Systems All PowerEdge systems.
MmioAbove4Gb
Table 47. MmioAbove4Gb
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description
This eld helps in enabling support for PCIe devices that require large amount of memory.
Enable this option only for 64-bit operating systems.
Example:
A:>syscfg --MmioAbove4Gb=Enabled
MmioAbove4Gb=Enabled
Usb3Setting
Table 48. Usb3Setting
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: Auto, Enabled, Disabled
Description
Enables or disables the USB 3.0 port.
• Auto — USB ports operate at USB 2.0 speed.
• Enabled — USB ports operates at USB 3.0 speed.
• Disabled — USB 3.0 host controller is disabled and the speed is set to USB 2.0.
Example:
A:>syscfg --Usb3Setting=Auto
Usb3Setting=Auto
Applicable Systems
All systems prior to PowerEdge 13G systems
CurrentEmbVideoState
Table 49. CurrentEmbVideoState
Valid Arguments
• On systems prior to 12G: NA
56 SYSCFG